The Supreme Jumper cables supplied in a set of four. Two black and two red and have a Banana connection and a Spade connection. And, the length of the jumpers is 36 cms. But, can be made to any length. Firewire is the best way to run your system so let the Supreme Jumper Cables help! The Supreme Jumper cables made with the same attention to detail as all Perkune audiophile cables and 100% guaranteed to work!
Supreme Jumper cables
There is very much discussion about Bi-wiring, and a Jumper cable is an easy and quick solution to convert your loudspeakers into Bi-wired configuration.
Many modern speakers offer a bi-wire or even tri-wirable crossover configuration. Which, is fed by multiple sets of terminals on the rear loudspeaker panel. And, there is no doubt that bi-wire or tri-wirable crossover can indeed enhance speaker performance. But, this requires a ground-up design. And, far too many companies split a conventional crossover.
The Loudspeakers
Today, a loudspeaker supplied with jumper plates is typical, which is a weak solution, if you want to use bi-wired cables. The quality of the jumper (or bridging plate) is often of a low standard. And, the solution to improving the sound from your system, is to install the set of Supreme Jumper cables.
The design used provides a straight-line, low-loss jumper cable. The Supreme Jumper cables employ 24k gold plated Banana/Spade connections. Also, the jumpers supplied with a spade/spade connection or banana/banana connection. Depending on your loudspeaker configuration. A set of anti-static pads fitted to the cables.
Listening
There is a lot of discussion around the topic of Bi-wiring. And you will find yourself a little lost in a sea of online forums about it! Some believe that bi-wiring is purely a marketing ploy. And, others, believe it makes a noticeable impact, particularly to middle range sound.
Each person is unique and hears things differently. And what is suitable for one is not necessarily right for the other. But a person is always able to detect the difference between a standard and Bi-wire configuration.
Specifications
- Cable size: 12 mm x 6 mm.
- Conductor Number: One
- Cable type: OFC containing 50 strands x 0.07 mm.
- Connection: Spade and Banana.
- Resistance: 0.014 Ohms/meter.
- Capacitance: 60 pF/meter.
- Inductance: 0.7uH.
- Insulation: Aluminium foil/Teflon/Felt tape
- Primary AirGap: DERAY-PBFSP.
- AirTube: 4 (one per cable)
- Secondary AirGap: DERAY-PBFSP.
- Outer sheath: CanuFlex PB-HB.
- Anti-static pads (ATS) fitted (2 per cable)
Customer testimonials
Pricing
4 x 36 Cms banana/spade connection 797 Euros
If you have enjoyed ‘Supreme Jumper cables’ please share with friends – thank you.
Perkune – Best budget Audiophile Cables