Power cord, Source cord and the Old timer cord
Old timer Interconnect , The RCA and XLR Interconnects and The Loud-Speaker cables.
POWER CORD and SOURCE CORD - The Cable is made in Germany using OFC Copper and fitted with plated connections for optimal signal transmission.
The termination for the cable is a Schuko connection and the reason for this is so you can change the polarity as not all machines and power outlets have the positive power on the right hand side which is very important as all power has to be to the same side on every component.
Stranded copper conductors - 3 x 2.5 MM2
Resistance: 9.98 Ohms/Kilometer
Current capacity: 29 Amps
Cable Mass: 168 Kilogrammes/Kilometer
Test Voltage: 2 KV
Max Volyage: 500 Volts
Max temp: +150 degrees C
Min temperature: -40 degrees C
Flame spread resistance: CSN EN 60332-1-2
Certificate: HAR. RoHS. REACH
INTERCONNECT RCA and XLR - The Cable made in Italy using OFC Copper and fitted with either Gold plated RCA push fit connections or Neutrix Silver plated (Hologram) connections. The interconnects are transparent which means what ever your source is giving you is exactly what is being fed to the amplifier, nothing more nothing less because the resistance is Zero and the Capacitance is zero over a one meter length.
Conductor resistance - 75 ohms / kilometer
Capacitor Core/Core - 55 pico farads/meter
Capacity Core/shield - 90 Pico Farads/meter
Conductors - OFC. red copper 2 x 0.25 (23AWG) mm2/cable
Insulation - Compact PE
Shield - Sprial covering 100% OFC. red copper
Sheath PVC
Outer sheath - PVC shrink wrap.
Loudspeaker cable - The Cable is made in Italy using OFC copper and fitted with either Gold plated Spade or Banana connectors which are the push fit type. The Loudspeaker cable are transparent which means what your amplifier is giving you is exactly what is being fed to the Loudspeakers, nothing more nothing less because the resistance is Zero and Capacitance is zero over a Three meter length.
Conductor resistance - 75 ohms / kilometer
Capacitor Core/Core - 55 pico farads/meter
Capacity Core/shield - 90 Pico Farads/meter
Conductors - OFC. red copper 2 x 0.25 (23AWG) mm2/cable
Insulation - Compact PE
Shield - Spiral covering 100% OFC red copper
Sheath PVC
Outer sheath - PVC shrink wrap.
After construction the cables are given a full three day frequency sweep and testing routine using Three CD’s which allows the cables to reach their potential and then they receive an antistatic treatment before shipping.
*Please note that we can make up any length or any connection combination on any of our cables and we can also make XLR/RCA crossovers and Schuko/2 pin crossovers.
Power cord and source cord Two meters
Interconnect cables - One meter
Loudspeaker speaker cable Three meters
*Please note that we can make up any length or any connection combination on any of our cables and we can also make XLR/RCA crossovers and Schuko/2 pin crossovers so if you have questions please ask.