The Reference Bi-wire conversion – There are many different theories on the use of Bi-wiring. And, one that certainly caught my eye was this. To achieve the correct sound, the cables should be of equal lengths. The idea is to correct signal speed and give an optimal performance—an exciting read. And, so I have found a solution – the Reference Bi-wire conversion.
Reference Bi-wire conversion
The reference Bi-wire conversion is the result of six months of hard work and aimed at the serious audiophile. The Reference cables offer exceptional performance, and the difference quickly heard after the first three seconds!
Reference
The construction has reached a new level. Firstly, the use of two internal conductors (2.5 mm2) with full shielding from top to bottom. Also, the conductors are spiral wound, which increases the cable length from 1 to 1.2 – giving more air and space in the musical presentation. The cables used are from the reference series. And, use, High purity OFC with either NextGen (24K gold plated) or Rhodium (Twin screw) Banana connections.
What you are doing is merely turning a single speaker cable into a double speaker cable. And, by doing this, you have eliminated the standard ‘bridging plates’ or the supplied ‘jumper’ cables. By using the Reference Bi-wire conversion 440 mm length of wires, you are now opening up a new experience.
I have spent months working with this project, and final testing witnessed by one of the leading Audiophiles in the Baltic countries. And, I will be forever grateful for help and time in allowing me to use all facilities during the Reference Bi-wire conversion project.
Protection
I have focused on critical factors that are crucial for developing the Bi-wire conversion cable. And, offer the perfect solution for the protection of your lines. A case supplied with your cable contains; , A test screwdriver, Anti-static fluid spray, Anti-vibration IsoPads, and cable test certificate. Which, is signed, dated, and carries the cable identification number.
Specification
- Cable length: 440 mm
- Conductor: 4 x 2.5 mm2
- High purity OFC
- Resistance: 0.004 Ohm
- Capacitance: 39.0 Pf
- Inductance: 0.13 uH
- Connector: Banana (24K gold plated) or Rhodium
- Construction: Double Symmetrical – Helix
- Low-loss PE insulation
- Additional support elements made of PE
- Low induction for homogeneous high-frequency reproduction
- Primary and Secondary AirGap: DERAY-PBFSP
- Aluminium Foil sheathing
- Single AirTube with Teflon – PTFE binding (4 per cable)
- Outer sheath: CanuFlex PE-HB
- Anti-static pads (ATS) fitted (One per cable)
The result is that you have two sets of cables 440 mm in length. And, each pack contains two cables made with either Gold plated or Rhodium banana connections.
Pricing
2 x 440 mm connection 897 Euros
Customer testimonials
If you have enjoyed ‘Reference Bi-wire conversion’. please share with friends – thank you
Perkune – Best budget Audiophile Cables