Loudspeaker series. The use of high-quality materials in the Loudspeaker cables reduces signal losses resulting in better sound reproduction. Especially in high power audio sets and over long distances between loudspeakers and amplifier.
On the whole, highly flexible wires have a larger conductor surface compared to solid designs. This benefits the transmission of high-frequency ranges. As well, the fine wire design (0.07 mm), and silver-plating supports the transmission of high frequencies
The low-loss PE wire insulation and additional PE dielectric also relieve the burden on the amplifier. The Ultimate Loudspeaker cables are constructed without the use of solder and incorporate ‘tip to tip’ AirGap isolation, which gives even greater protection against external and electrical vibrations.
The biggest step forward has been the development and introduction of the ‘AirGap’ isolation and air tube system which helps reduce vibrations. This has made a big impact on the sound heard and available in three levels.
The second change has been the introduction of Aluminum foil sheathing. Noise is not only a major burden but also a health hazard. This is why in the construction sector and in the industry and many other areas a lot of attention is paid to noise protection.
Aluminium foils provide better sound insulation and help to eliminate unwanted noise sources. The Aluminum foils ability to absorb sound allows unwanted noise to be picked up directly at the source and prevent its further propagation. Aluminium foil offers 85% effective as a noise insulator. Which means, only 15% of the respective sound passes through it and an ideal component for use in audio cables.
The Ultimate 2.5-meter loudspeaker cable has an amazing sound in every aspect. Bringing everything you could imagine right into your room. You will hear details, after echoes, and many things that were never so apparent. The music is all around, and you become part of the presentation. Silver plated (2.45 g/m) 99.99% OFC multi-strand conductors. 24K Gold plated solder free anti-vibration connectors and Three-level ‘AirGap’ isolation. These are all contributing factors that allow you more from your music.
The cables can be fitted with either Banana or Spade Anti-vibration 24K gold plated connections. All connections are double-screwed eliminating the need for soldering, so retaining perfect signal quality.
The 3.5-meter Loudspeaker cable will give you the ultimate listening experience. A huge soundstage with a sensation of 3D is apparent. Total transparency with pinpoint imaging. Details and micro details with the feeling of air and space is upon you. You become totally involved in the music. You will also be aware of a greater sense of speed, and dynamics.
24K gold-plated spade connections can also be fitted and the cable configured to your personal requirements at no extra cost.
- Cable Size: 17 x 10.0 mm.
- Conductor: 2.50 mm.
- Number: Two Silver-plated (2.45g/m) O.F.C 99.99% (containing 50 strands x 0.07 mm).
- Resistance: 0.014 Ohms/meter.
- Capacitance: 60 pF/meter.
- Inductance: 0.7uH.
- Insulation: Vinyl.
- Primary & Secondary AirGap: DERAY-PBFSP.
- Outer sheath: CanuFlex PB-HB.
- Certificate: ISO 9001:2008
If you have enjoyed reading ‘Loudspeaker series’, please share with friends – thank you.
Perkune home – Best audiophile cables online